Save at Work

Use task lighting where feasible.

Remove unnecessary lamps (de-lamp) in overlit areas. Check your light levels against standards from the Illuminating Engineering Society (IES) to see if you have areas that are over- or under-lit.

Install timers or photocells on outside lights.

Use shades and blinds to control direct sun through windows in both summer and winter to prevent or encourage heat gain.

Replace or retrofit non-energy efficient light fixtures.

Maximize daylighting. After all, sunlight is free! Open or close blinds to make the best use of natural daylight and take advantage of skylights or other natural daylight sources to reduce lighting during daytime hours.

Install “occupant sensors” to automatically turn lights off and on.

Remove or disconnect unnecessary light fixtures.

Replace incandescent light bulbs with LEDs.

Install LED exit signs.

Implement a regular lighting maintenance program.

Lower light levels, where appropriate, such as around computer monitors.

Turn off lights when not in use or when natural daylight is sufficient. This can reduce lighting expenses by 10% – 40%.

Find and fix water leaks.

Set your water heater at the lowest required temperature.

Use hot water wisely.

Insulate hot water holding tanks and hot & cold water pipes.

Install faucet aerators and efficient showerheads.