Save at Work

Replace or retrofit non-energy efficient light fixtures.

Remove or disconnect unnecessary light fixtures.

Remove unnecessary lamps (de-lamp) in overlit areas. Check your light levels against standards from the Illuminating Engineering Society (IES) to see if you have areas that are over- or under-lit.

Replace incandescent light bulbs with LEDs.

Turn off lights when not in use or when natural daylight is sufficient. This can reduce lighting expenses by 10% – 40%.

Install timers or photocells on outside lights.

Use shades and blinds to control direct sun through windows in both summer and winter to prevent or encourage heat gain.

Install “occupant sensors” to automatically turn lights off and on.

Implement a regular lighting maintenance program.

Install LED exit signs.

Maximize daylighting. After all, sunlight is free! Open or close blinds to make the best use of natural daylight and take advantage of skylights or other natural daylight sources to reduce lighting during daytime hours.

Lower light levels, where appropriate, such as around computer monitors.

Use task lighting where feasible.

Use hot water wisely.

Install faucet aerators and efficient showerheads.

Set your water heater at the lowest required temperature.

Find and fix water leaks.

Insulate hot water holding tanks and hot & cold water pipes.